CO₂ Incubators MCO-170AIC

MCO-170AIC
MCO-170AIC
Ambient Temperature  : 5°C to 50°C
Effective Capacity : 170 liters (6.0 cu.ft.)
MCO-170AIC.pdf
Model MCO-170AIC
External Dimensions 620 x 710 x 900 (mm) / 24.4 x 28.0 x 35.4 (inch)
Interior Dimensions 490 x 523 x 665 (mm) /19.3 x 20.6 x 26.2 (inch)
Net Weight 80kg
Interior Volume 165 liters (5.8 cu.Ft.)
Data Acquisition Automatic log function of temperature, CO2, Door opening/closing, Alarm and CSV file output
Exterior Cabinet and Door Galvanized steel with backed-on finish
Interior and Shelves Copper-enriched stainless steel
Outer Door Galvanized steel with backed-on finish, Reversible heated
Inner Door Tempered glass
Shelves Copper-enriched stainless steel, 4 supplies as standard (Maximum 10), Exterior dimensions: 475 (W) x 450 (D) x 12 (H) mm, maximum load 7kg/shelf, Adjustable
Access Port Diameter 30mm port with non-VOC silicone stoppers (1 on back side)
Insulation Rigid foam polyurethane
Air Flow Gentle vertical airflow, continuous with inner door closed
Air Filter 0.3μm, Effeciency:99.97% or higher (for CO2)
Communication Remote alarm contacts standard. Optional 4-20mA connection. Optional with RS-232C/ RS-485/LAN data ports
CO2 Gas Connection 4mm to 6mm inner diameter tubing
CO2 Gas Pressure 0.03 MPa (G) (0.3Kgf/cm2G, 4.3psiG) from two stage CO2 regulator
Tempearture Control Range +5°C above ambient to 50 °C*1 (Ambient temperature: 5°C-35°C)
Tempearture Uniformity ±0.25°C (23°C ambient, setting: 37°C, CO2: 5%, no load)*2
CO2 Control Range and Deviation 0% to 20%,±0.15% (23°C ambient, setting 37°C, 5% CO2, no load)
Interior Humidity 95% ±5%R.H. at 37°C by natural evaporation with humidifying pan
Max. Power Consumption Max. 379W
Max. Heat Discharge 1,070kJ/h
CO2 Sensor Platform Ceramic based, single beam infrared sensor, with dual wavelength measurement for continuous auto-zero calibration
CO2 Sampling Patent Pending No moving parts; airflow passess over in/out ports to sustain continuous sampling
Leveling Feet 4